Turbine type welding plug valve

PRODUCTS > Plug valve > Turbine type welding plug valve

Turbine type welding plug valve

Product model:X363F
Nominal diameter: DN15~1400mm (1/2) ~56
Pressure range: PN0.8~42MPa (150Lb~2500Lb)
Operating temperature: -29℃~+429℃
Main material: WCB, LCB, A105, CF8, CF3, CF8M, CF3M, C5, WC
Applicable medium: water, steam, oil, acid base and so on

Contact purchase

shared：

[Essential information]

The main material of the turbine type welding plug valve is carbon steel, stainless steel, ultra low carbon stainless steel, duplex stainless steel, heat-resisting oxidation resistant steel, low temperature steel, etc.. The driving modes are manual, gear drive, electric, pneumatic, hydraulic, electro hydraulic transmission, etc.. The applicable temperature is -196~800 degrees centigrade.

[Standard parameter]

Design manufacture	GB	ANSI/API
Design manufacture	GB 12240	API 599/API 6D
Structural length	GB 12221（Middle series）	ANSI B 16.10、DIN 3202
Flange dimension	JB78/GB9113、HG20592～HG20635	ANSI B16.5、ANSI B 16.11、ANSI 16.25
Pressure test	GB/T13927	API598

[Valve features]

1, Plug valve for regular operation, opening and closing fast and light.

2, Plug fluid resistance is small.

3, Plug valve structure is simple, relatively small size, light weight, easy maintenance.

4, Good sealing performance.

5, The direction of installation is not limited, the flow of media can be arbitrary.

6, No vibration, small noise.

[Adaptive condition]

According to the structural characteristics of the plug valve and the design can achieve the function, you can choose the following principles.

1, As for the distribution media and change the flow direction of medium, its temperature is not higher than 300℃, Nominal pressure less than or equal to 1.6MPa,Nominal diameter less than or equal to 300mm, suggested the use of multiple plug valve.

2, Milk, juice, beer and other food enterprises and pharmaceutical factories and other equipment and pipes, it is recommended to use austenitic stainless steel system, compact conic cone plug valve.

3, In oil field exploitation, natural gas field exploitation, pipeline transportation branch pipe, refining and cleaning equipment, nominal pressure level is not more than Class300, nominal diameter is not more than 300mm, it is recommended to use oil seal type conical plug valve.

4, The exploitation of oil and natural gas production, pipeline transportation, refining and pipe cleaning equipment, nominal pressure level is not greater than Class7500, nominal size is not greater than 900mm, the temperature is not higher than 340℃, suggested the use of conical plug valve oil seal.

5, In large scale chemical industry, pipelines and equipment containing corrosive medium, required to open or close the faster the occasion, for nitrate based medium can be used Teflon sleeve conical plug valve seal; for acetic acid based medium, can choose Cr18Ni12Mo2Ti stainless steel Teflon sleeve conical plug valve seal.

6, In gas pipelines, natural gas, HVAC systems and equipment, nominal diameter is less than 200mm, should choose the packed type conical plug.